How to calculate cubic yards
Bulk landscape material is sold by the cubic yard: a cube 3 feet on each side, or 27 cubic feet. To find how many you need, work out the volume of your area in cubic feet and divide by 27.
cubic yards = cubic feet ÷ 27
tons = cubic yards × lb per cubic yard ÷ 2,000
Example: a 12 by 20 ft bed, 3 inches deep. 12 × 20 = 240 sq ft. 3 inches is 0.25 ft, so 240 × 0.25 = 60 cubic feet. 60 ÷ 27 = 2.22 cubic yards. As mulch that weighs about 0.67 tons; as gravel the same volume weighs 3.14 tons. Same yards, nearly five times the weight, which is why a yard of mulch fits in a pickup and a yard of gravel does not.
Shapes
- Rectangle: length × width.
- Circle: 3.1416 × (diameter ÷ 2)².
- Triangle: base × height ÷ 2.
- Tree ring: the circle of the outer diameter minus the circle of the trunk or inner edge.
- Anything else: split it into the shapes above and add them, or enter a known square footage.
Cubic yards to tons by material
Most suppliers quote stone and sand by the ton and mulch and soil by the yard. This is the conversion the calculator uses. Weights are for loose, dry-to-damp material; wet material is heavier. See material weights and sources for where each number comes from, or use the cubic yards to tons converter to go either way.
| Material | lb per yd³ | Tons per yd³ | Yards per ton | Sq ft per ton at 3 in | Typical range |
|---|---|---|---|---|---|
| Gravel (general) | 2,830 | 1.42 | 0.71 | 76 | 1.25 to 1.50 t |
| Pea gravel | 2,800 | 1.40 | 0.71 | 77 | 1.30 to 1.50 t |
| Crushed stone (#57) | 2,600 | 1.30 | 0.77 | 83 | 1.15 to 1.40 t |
| Crusher run / road base | 3,000 | 1.50 | 0.67 | 72 | 1.35 to 1.65 t |
| Decomposed granite | 2,800 | 1.40 | 0.71 | 77 | 1.30 to 1.50 t |
| River rock | 2,700 | 1.35 | 0.74 | 80 | 1.25 to 1.45 t |
| Lava rock | 1,000 | 0.50 | 2.00 | 216 | 0.40 to 0.65 t |
| Cobble / large landscape rock | 2,700 | 1.35 | 0.74 | 80 | 1.20 to 1.45 t |
| Fill dirt | 2,100 | 1.05 | 0.95 | 103 | 1.00 to 1.30 t |
| Clay fill | 2,700 | 1.35 | 0.74 | 80 | 1.30 to 1.50 t |
| Topsoil | 2,150 | 1.08 | 0.93 | 100 | 1.00 to 1.20 t |
| Garden soil / raised bed mix | 1,800 | 0.90 | 1.11 | 120 | 0.75 to 1.05 t |
| Compost | 1,000 | 0.50 | 2.00 | 216 | 0.40 to 0.65 t |
| Mason / play sand | 2,600 | 1.30 | 0.77 | 83 | 1.25 to 1.40 t |
| Fill / concrete sand | 2,700 | 1.35 | 0.74 | 80 | 1.30 to 1.60 t |
| Sand, wet | 3,200 | 1.60 | 0.63 | 68 | 1.50 to 1.65 t |
| Shredded hardwood mulch | 600 | 0.30 | 3.33 | 360 | 0.20 to 0.40 t |
| Pine bark nuggets | 450 | 0.23 | 4.44 | 480 | 0.18 to 0.30 t |
| Wood chips / playground mulch | 500 | 0.25 | 4.00 | 432 | 0.20 to 0.35 t |
| Concrete | 4,050 | 2.03 | 0.49 | 53 | 1.95 to 2.05 t |
How much does a cubic yard cover?
Coverage depends only on depth, not on the material: 324 ÷ depth in inches gives the square feet one yard covers.
| Depth | 1 yd³ covers | Yards per 100 sq ft | 2 cu ft bags per 100 sq ft |
|---|---|---|---|
| 1 in | 324 sq ft | 0.31 | 5 |
| 2 in | 162 sq ft | 0.62 | 9 |
| 3 in | 108 sq ft | 0.93 | 13 |
| 4 in | 81 sq ft | 1.23 | 17 |
| 5 in | 65 sq ft | 1.54 | 21 |
| 6 in | 54 sq ft | 1.85 | 25 |
| 8 in | 41 sq ft | 2.47 | 34 |
| 12 in | 27 sq ft | 3.70 | 50 |
Before you order
- Round up. Many yards sell in half or whole yards. The calculator shows the next half yard.
- Add extra. 5% for stone, 10% for mulch and topsoil, 15 to 25% for fill dirt that will be compacted.
- Check the truck. A half-ton pickup can carry about 2 yards of mulch but only about half a yard of gravel.
- Ask for the supplier's weight. Their scale ticket decides what you pay per ton; type it into the weight box.
Cubic yard questions
How do I calculate cubic yards?
Multiply length × width × depth with all three in feet, then divide by 27. If the depth is in inches, divide it by 12 first. For example, 12 ft × 20 ft × (3 ÷ 12) ft = 60 cubic feet, and 60 ÷ 27 = 2.22 cubic yards.
How many square feet does a cubic yard cover?
A cubic yard covers 324 sq ft at 1 inch deep, 162 sq ft at 2 inches, 108 sq ft at 3 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches. Divide 324 by the depth in inches.
How do I convert cubic yards to tons?
Multiply cubic yards by the weight of one cubic yard of your material in pounds, then divide by 2,000. Gravel and sand run about 1.3 to 1.4 tons per yard, topsoil about 1.1, fill dirt 1 to 1.3, and mulch only 0.2 to 0.4. The table on this page lists each material.
How many cubic feet are in a cubic yard?
27. A yard is 3 feet, so a cubic yard is 3 × 3 × 3 = 27 cubic feet. It is also 0.765 cubic meters.
How do I measure an irregular area?
Split it into simple shapes, such as a rectangle plus a half circle or a triangle, and add each one as its own area in the calculator. For a curvy bed, measure the longest length and the average width; this usually lands within 10 percent.
How many bags are in a cubic yard?
13.5 bags of 2 cu ft, 9 bags of 3 cu ft, 27 bags of 1 cu ft and 54 bags of 0.5 cu ft. Heavy materials are often sold by weight instead: a cubic yard of gravel or sand is about 54 bags of 50 lb.