How to calculate landscape rock
Rock is sold by the ton far more often than mulch is, so the useful answer is a weight. Work out the cubic yards of the bed first, then multiply by the weight of the stone you picked. The type matters: the same bed takes three times the tonnage in river rock that it does in lava rock.
tons = cubic yards × lb per yard ÷ 2,000
Example: a 15 by 6 ft rock bed, 3 inches deep
90 sq ft × 3 ÷ 324 = 0.83 cubic yards, plus 5% is 0.88 yd³. In river rock that is 1.18 tons. In lava rock it is only 0.44 tons, or about 875 lb.
Example: drip edge along the house
A 2 ft wide strip of river rock along 60 ft of wall at 4 inches is 120 sq ft and 1.56 cubic yards: about 2.10 tons, or 84 bags of 50 lb.
Rock depth by stone size
| Project | Depth | Material | 1 yd³ covers | Extra to add |
|---|---|---|---|---|
| Rock bed, 3/4 to 1.5 in stone | 2 in | River rock | 162 sq ft | 5% |
| Rock bed, 1 to 3 in stone | 3 in | River rock | 108 sq ft | 5% |
| Cobble bed, 3 to 5 in | 5 in | Cobble / large landscape rock | 65 sq ft | 5% |
| Dry creek bed | 6 in | Cobble / large landscape rock | 54 sq ft | 10% |
| Lava rock bed | 3 in | Lava rock | 108 sq ft | 5% |
| Crushed stone bed | 3 in | Crushed stone (#57) | 108 sq ft | 5% |
| Drip edge along the house Over fabric, sloped away from the wall | 4 in | River rock | 81 sq ft | 5% |
Landscape rock weight per cubic yard
Rock weights come from supplier quotes for loose stone and Engineering ToolBox for crushed limestone. Different quarries differ, so type your yard's number into the weight box if they give one.
| Material | lb per yd³ | Tons per yd³ | Yards per ton | Sq ft per ton at 3 in | Typical range |
|---|---|---|---|---|---|
| River rock | 2,700 | 1.35 | 0.74 | 80 | 1.25 to 1.45 t |
| Lava rock | 1,000 | 0.50 | 2.00 | 216 | 0.40 to 0.65 t |
| Cobble / large landscape rock | 2,700 | 1.35 | 0.74 | 80 | 1.20 to 1.45 t |
| Crushed stone (#57) | 2,600 | 1.30 | 0.77 | 83 | 1.15 to 1.40 t |
| Decomposed granite | 2,800 | 1.40 | 0.71 | 77 | 1.30 to 1.50 t |
| Pea gravel | 2,800 | 1.40 | 0.71 | 77 | 1.30 to 1.50 t |
Rock types compared
- River rock is smooth and rounded, from 3/4 inch up to 5 inch. Good for beds, borders and drainage. See the river rock calculator for sizes.
- Lava rock is porous and light, so a ton goes a long way and it is easy to spread. It fades in sun and is hard to rake out later.
- Crushed stone has sharp edges that lock, so it stays put on paths and slopes. The gravel calculator covers driveway and base layers.
- Decomposed granite packs into a firm, walkable surface when compacted.
- Cobble (3 to 8 inch) has more air between stones, so it covers less per ton than the yardage suggests. Add 10%.
Rock calculator questions
How much landscape rock do I need per square foot?
At 3 inches deep, each square foot takes 0.25 cubic feet, or about 25 lb of river rock or crushed stone. A ton covers about 80 sq ft at that depth. Lava rock is much lighter: a ton covers about 216 sq ft.
How many tons of rock are in a cubic yard?
Most landscape rock weighs 1.3 to 1.45 tons per cubic yard: river rock about 1.35, crushed stone about 1.3. Lava rock is about 0.5 tons per yard because it is full of air pockets.
How deep should landscape rock be?
A layer should be about twice as thick as the stones are wide. For 3/4 to 1.5 inch rock, 2 inches; for 1 to 3 inch rock, 3 inches; for 3 to 5 inch cobble, 4 to 5 inches. Thicker layers do not stop weeds better; landscape fabric or a pre-emergent does.
How do I calculate rock for a dry creek bed?
Use the length of the creek and its average width, and a depth of 6 inches for mixed cobble. The calculator assumes a flat layer, so add 10 percent for the dish shape and the larger accent boulders, which you buy separately by the piece.
Is rock or mulch cheaper for landscaping?
Mulch is cheaper to buy, rock is cheaper to keep. Rock costs several times more per yard and weighs about five times as much, but it does not need topping up every year. Run the same bed through the mulch calculator to compare.