Dirt Calculator

Fill a hole, raise a low spot or build up a grade. Enter the size and depth and get the cubic yards and tons of fill dirt, with extra for compaction.

1

Measure the area

Area 1

300 sq ft

Odd shape? Split it into rectangles, circles and triangles and add each one.

2
lb1.05 tons per yd³. Use your supplier's number if you have it.
3

Depth Pick a project for the recommended depth, or type your own

You need

6.67 cubic yards

Order 7 yd³ if it is sold by the half yard

Weight
7.00 tons
Cubic feet
180.0 ft³
Pounds
14,000 lb
Metric
5.10 m³ · 6.35 t

Bags

240 bags

Cost

Enter a price to see the total.

Truckloads

  • Half-ton pickup10 loads
  • 3/4 to 1-ton pickup5 loads
  • Single-axle dump truck2 loads
  • Tandem dump truck1 load

Pickups run out of payload before bed space with stone and soil. Check your truck's payload rating.

How much dirt do I need?

Measure the length and width of the area to fill and the average depth. Multiply them in feet and divide by 27 to get cubic yards. Then add extra: fill dirt arrives loose and shrinks as it is compacted, so the hole always takes more than its measured volume.

cubic yards = length × width × depth (all in ft) ÷ 27 × (1 + compaction %)
tons = cubic yards × 2,100 lb ÷ 2,000

Example: raise a 20 by 15 ft low spot by 6 inches

300 sq ft × 0.5 ft = 150 cubic feet, which is 5.56 cubic yards. With 20% for compaction you need 6.67 cubic yards, about 7.0 tons of fill dirt. Order 7 yards: slightly more than most single-axle dump trucks carry, so ask whether it comes in one trip.

Measuring an uneven low spot

Stretch a string line level across the area and measure down to the ground every few feet. Average the readings and use that as the depth. For a slope that goes from 0 to 12 inches, the average depth is 6 inches.

Fill dirt depth and compaction guide

ProjectDepthMaterial1 yd³ coversExtra to add
Fill a low spot6 inFill dirt54 sq ft20%
Raise a yard grade
Compact every 4 to 6 in
12 inFill dirt27 sq ft25%
Fill a hole or old pool
Set the depth unit to ft for deep fills
48 inFill dirt7 sq ft25%
Backfill along a foundation
Slope it away from the house
24 inClay fill14 sq ft20%
Fill under a slab or pad4 inFill dirt81 sq ft20%
Level a lawn before topsoil2 inFill dirt162 sq ft15%

Fill an old in-ground pool, 32 by 16 ft and 5 ft deep on average, and you are at 119 cubic yards with 25% extra: around 124 tons, or 9 tandem dump trucks. Check with your town first: many require engineered fill and a permit for pool removal.

Dirt weight per cubic yard

Dirt varies more than any other bulk material. Moisture alone can add 20 percent. Use these as a starting point and ask your hauler.

Materiallb per yd³Tons per yd³Yards per tonSq ft per ton at 6 inTypical range
Fill dirt2,1001.050.95511.00 to 1.30 t
Clay fill2,7001.350.74401.30 to 1.50 t
Topsoil2,1501.080.93501.00 to 1.20 t
Fill / concrete sand2,7001.350.74401.30 to 1.60 t

Fill dirt by the truckload

TruckTypical loadFill dirtCovers at 6 in
Half-ton pickup1,500 lb payload0.71 yd³39 sq ft
3/4 to 1-ton pickup3,000 lb payload1.43 yd³77 sq ft
Single-axle dump truckabout 6 yd³ / 7 tons6 yd³324 sq ft
Tandem dump truckabout 14 yd³ / 15 tons14 yd³756 sq ft
Typical figures; truck capacities vary and local weight limits apply.

Dirt calculator questions

How much does a yard of fill dirt weigh?

About 1 to 1.3 tons. Engineering ToolBox lists loose dry dirt at 1,220 kg/m³ (2,056 lb per cubic yard) and loose moist dirt at 1,250 kg/m³ (2,107 lb). Clay-heavy fill and wet dirt are heavier, up to 1.5 tons per yard.

How much extra fill dirt do I need for compaction?

Plan 15 to 25 percent extra. Loose fill shrinks as it is compacted in lifts or settles over a season. Use the higher end for deep fills, clay-rich dirt and anything that will carry a slab, a patio or a driveway.

How many cubic yards of dirt are in a dump truck?

A single-axle dump truck carries about 5 to 7 cubic yards of dirt and a tandem about 10 to 14, depending on the bed and the local weight limit. Dirt usually maxes out on weight before the bed is heaped. The truckload estimate in the calculator checks both.

What is the difference between fill dirt and topsoil?

Fill dirt is subsoil: mostly sand, clay and rock with little organic matter, so it compacts and stays put. It is for raising grade and filling holes. Topsoil is the dark, organic top layer that plants grow in. Fill the bulk with fill dirt, then finish with 4 to 6 inches of topsoil; the topsoil calculator handles that layer.

How do I calculate dirt for a hole?

Use the hole's shape and set the depth in feet. A round hole 4 ft across and 3 ft deep is 3.1416 × 2² × 3 = 37.7 cubic feet. With 25% for compaction that is 1.75 cubic yards.

Other material calculators