River Rock Calculator

Pick the stone size first: it sets the depth. Then enter the bed and see the cubic yards and tons of river rock to order and how far a ton will go.

1

Measure the area

Area 1

100 sq ft

Odd shape? Split it into rectangles, circles and triangles and add each one.

2
lb1.35 tons per yd³. Use your supplier's number if you have it.
3

Depth Pick a project for the recommended depth, or type your own

You need

0.97 cubic yards

Order 1 yd³ if it is sold by the half yard

Weight
1.31 tons
Cubic feet
26.3 ft³
Pounds
2,625 lb
Metric
0.74 m³ · 1.19 t

Bags

53 bags

Cost

Enter a price to see the total.

Truckloads

  • Half-ton pickup2 loads
  • 3/4 to 1-ton pickup1 load
  • Single-axle dump truck1 load
  • Tandem dump truck1 load

Pickups run out of payload before bed space with stone and soil. Check your truck's payload rating.

River rock depth by size

The stone size you pick sets the depth. Too thin and the fabric or soil shows between stones; too thick and you pay for rock nobody sees. The rule is about twice the width of the largest stone.

Stone sizeDepth1 ton coversGood for
3/8 in (pea)2 in120 sq ftPaths, between pavers, pots
3/4 to 1.5 in2 in120 sq ftBeds, borders, drip edges
1 to 3 in3 in80 sq ftBeds, drainage swales, around downspouts
3 to 5 in5 in48 sq ftDry creek beds, slopes, accents

How much river rock do I need?

cubic yards = sq ft × depth (in) ÷ 324
tons = cubic yards × 1.35

A 20 by 5 ft bed of 1 to 3 inch river rock at 3 inches: 100 sq ft × 3 ÷ 324 = 0.93 cubic yards, plus 5% is 0.97 yd³ or 1.31 tons. In bags that is 53 bags of 0.5 cu ft.

River rock coverage per ton

Stone yards usually price river rock by the ton. These figures use 2,700 lb per cubic yard; if your supplier gives a different weight, type it into the calculator.

Depth1 ton coversTons per 100 sq ft0.5 cu ft bags per 100 sq ft
1 in240 sq ft0.4217
2 in120 sq ft0.8334
3 in80 sq ft1.2550
4 in60 sq ft1.6767
5 in48 sq ft2.0884
6 in40 sq ft2.50100

River rock weight compared

Materiallb per yd³Tons per yd³Yards per tonSq ft per ton at 3 inTypical range
River rock2,7001.350.74801.25 to 1.45 t
Pea gravel2,8001.400.71771.30 to 1.50 t
Cobble / large landscape rock2,7001.350.74801.20 to 1.45 t

For lava rock, crushed stone or decomposed granite beds, use the rock calculator. For river rock under a driveway or as a base, use crushed stone instead: round stone does not lock together, see the gravel calculator.

River rock questions

How much area does a ton of river rock cover?

About 120 sq ft at 2 inches, 80 sq ft at 3 inches and 60 sq ft at 4 inches, using 2,700 lb per cubic yard. Larger stones leave more air between them, so 3 to 5 inch rock covers a little less per ton.

How much does a cubic yard of river rock weigh?

About 1.35 tons (2,700 lb), with most suppliers quoting between 1.25 and 1.45 tons. Wet stone weighs a bit more.

How many bags of river rock make a yard?

54 bags of 0.5 cu ft. Bagged river rock is usually sold in 0.5 cu ft bags of about 50 lb, so a yard is around 2,700 lb of bags. For more than a third of a yard, bulk is usually cheaper.

How deep should river rock be?

At least twice the stone size so the ground does not show: 2 inches for 3/4 to 1.5 inch rock, 3 inches for 1 to 3 inch rock and 4 to 5 inches for 3 to 5 inch rock. Lay landscape fabric underneath to keep the rock from sinking into the soil.

Can I put river rock over existing mulch?

Better not. Mulch breaks down into soil, which then grows weeds between the stones and makes the rock sink. Rake the mulch out, lay fabric, then add the rock. The mulch calculator can tell you how much you are removing.

Other material calculators