How much gravel do I need?
Multiply the length by the width to get square feet, multiply by the depth in feet, then divide by 27 to turn cubic feet into cubic yards. Multiply cubic yards by the weight of your gravel to get tons. The calculator above does all three steps, adds extra for compaction and turns the result into bags, truckloads and a price.
tons = cubic yards × lb per cubic yard ÷ 2,000
Example: a 50 by 10 ft gravel driveway, 4 inches deep
50 × 10 = 500 sq ft. 4 inches is 0.333 ft, so 500 × 0.333 = 166.7 cubic feet. Divide by 27 for 6.17 cubic yards, plus 5% for settling is 6.48 yd³. At 2,600 lb per yard for #57 crushed stone that is 8.43 tons. Order 6.5 yards or 9 tons.
How deep should gravel be?
Depth depends on the job and on stone size: a layer should be at least twice as thick as the largest stone. Pick a project in step 2 of the calculator and it fills in these depths for you.
| Project | Depth | Material | 1 yd³ covers | Extra to add |
|---|---|---|---|---|
| Driveway top layer Over a compacted base of larger stone | 4 in | Crushed stone (#57) | 81 sq ft | 5% |
| Driveway resurface | 2 in | Crushed stone (#57) | 162 sq ft | 5% |
| New driveway base layer Usually two lifts, compacted between them | 6 in | Crusher run / road base | 54 sq ft | 10% |
| Walkway or garden path | 3 in | Pea gravel | 108 sq ft | 5% |
| Patio or paver base | 4 in | Crusher run / road base | 81 sq ft | 10% |
| Shed or hot tub pad | 4 in | Crushed stone (#57) | 81 sq ft | 5% |
| French drain trench Use trench width × length as the area | 12 in | Crushed stone (#57) | 27 sq ft | 5% |
| Decomposed granite patio | 3 in | Decomposed granite | 108 sq ft | 10% |
| Pea gravel play area CPSC playground surfacing guidance: 9 in | 9 in | Pea gravel | 36 sq ft | 5% |
Gravel weight per cubic yard by type
The yards-to-tons conversion is where most gravel estimates go wrong: stone yards sell by the ton, but your project is measured in cubic yards. These are typical weights for dry, loose stone. You can type your supplier's figure into the weight box in the calculator.
| Material | lb per yd³ | Tons per yd³ | Yards per ton | Sq ft per ton at 3 in | Typical range |
|---|---|---|---|---|---|
| Gravel (general) | 2,830 | 1.42 | 0.71 | 76 | 1.25 to 1.50 t |
| Pea gravel | 2,800 | 1.40 | 0.71 | 77 | 1.30 to 1.50 t |
| Crushed stone (#57) | 2,600 | 1.30 | 0.77 | 83 | 1.15 to 1.40 t |
| Crusher run / road base | 3,000 | 1.50 | 0.67 | 72 | 1.35 to 1.65 t |
| Decomposed granite | 2,800 | 1.40 | 0.71 | 77 | 1.30 to 1.50 t |
| River rock | 2,700 | 1.35 | 0.74 | 80 | 1.25 to 1.45 t |
Gravel driveway calculator: layers and depth
A new gravel driveway is built in layers, and each layer is its own order. Run the calculator once per layer with the same length and width:
- Base, 4 to 6 in: large crushed stone (#3 or #4, 1.5 to 3 in) or crusher run, compacted.
- Middle, 3 to 4 in: #57 crushed stone (about 1 in).
- Top, 2 to 3 in: smaller crushed stone with fines, such as #411 or crusher run, which locks together under tires.
Resurfacing an existing driveway usually needs only 2 inches of top stone. Avoid pea gravel on driveways: round stones roll under tires and do not lock.
How much does a cubic yard of gravel cover?
One cubic yard spreads over 324 sq ft at 1 inch deep. Divide 324 by your depth in inches for any other depth.
| Depth | 1 yd³ covers | Yards per 100 sq ft | Tons per 100 sq ft | 0.5 cu ft bags per 100 sq ft |
|---|---|---|---|---|
| 1 in | 324 sq ft | 0.31 | 0.40 | 17 |
| 2 in | 162 sq ft | 0.62 | 0.80 | 34 |
| 3 in | 108 sq ft | 0.93 | 1.20 | 50 |
| 4 in | 81 sq ft | 1.23 | 1.60 | 67 |
| 6 in | 54 sq ft | 1.85 | 2.41 | 100 |
| 8 in | 41 sq ft | 2.47 | 3.21 | 134 |
| 12 in | 27 sq ft | 3.70 | 4.81 | 200 |
Bags or bulk gravel?
Bagged gravel makes sense for small jobs: filling around pavers, a few stepping stones, or a pot base. A 0.5 cu ft bag covers about 2 sq ft at 3 inches. Past about 15 bags, a bulk delivery is usually cheaper even with the delivery fee, and you avoid hauling over a ton of stone in your car. Most half-ton pickups can carry under one cubic yard of gravel because of payload, not bed size: the truckload estimate in the calculator shows this.
Gravel calculator questions
How much area does a ton of gravel cover?
About 83 sq ft at 3 inches deep for crushed stone at 1.30 tons per yard, or roughly 125 sq ft at 2 inches and 62 sq ft at 4 inches. Heavier mixes like crusher run cover a little less per ton.
How many tons are in a cubic yard of gravel?
Most gravel weighs 1.3 to 1.5 tons per cubic yard. Pea gravel is about 1.4, #57 crushed stone about 1.3, and crusher run about 1.5 because the fines fill the gaps between stones. Wet gravel weighs more. Engineering ToolBox lists dry gravel at 1,680 kg/m³, which is 2,832 lb or 1.42 tons per cubic yard.
How many bags of gravel make a cubic yard?
A cubic yard is 27 cubic feet, so it takes 54 bags of 0.5 cu ft or 27 bags of 1 cu ft. Most 0.5 cu ft bags of gravel weigh about 50 lb. Past a third of a yard, bulk delivery is usually cheaper and much less lifting.
How much gravel do I need for a 10x10 area?
At 3 inches deep, a 10 by 10 ft area is 100 sq ft × 0.25 ft = 25 cubic feet, which is 0.93 cubic yards or about 1.30 tons of pea gravel. At 4 inches it is 1.23 cubic yards.
Should I order gravel by the ton or by the yard?
Order in whatever unit your supplier prices in. Quarries and stone yards usually sell by the ton, landscape yards often by the yard. The calculator gives both, so you can compare quotes. If you are between sizes, round up: a few extra wheelbarrows of gravel are easy to use, a second delivery fee is not.
Does gravel compact, and how much extra should I add?
Crushed stone and crusher run settle 5 to 15 percent when they are compacted with a plate compactor or driven on. Round pea gravel barely compacts but spreads and migrates. Add 5 percent for a decorative layer and 10 percent for a base that will be compacted.