How much sand do I need?
Multiply length, width and depth in feet and divide by 27 for cubic yards. Sand is sold by the ton in bulk and by the 50 lb bag at stores, so convert with the weight: about 1.30 tons per yard when dry, more when it is damp.
50 lb bags = cubic yards × 2,600 ÷ 50
Example: an 8 by 8 ft sandbox, 12 inches deep
64 sq ft × 1 ft = 64 cubic feet, or 2.37 cubic yards. With 5% extra that is 2.49 yd³ and 3.24 tons of sand, or 130 bags of 50 lb. At that size bulk delivery is much cheaper.
How deep should sand be?
| Project | Depth | Material | 1 yd³ covers | Extra to add |
|---|---|---|---|---|
| Paver bedding layer Screeded flat over a compacted gravel base | 1 in | Fill / concrete sand | 324 sq ft | 10% |
| Sandbox | 12 in | Mason / play sand | 27 sq ft | 5% |
| Above-ground pool base Extend 1 ft past the pool wall | 2 in | Mason / play sand | 162 sq ft | 10% |
| Lawn leveling In low spots only; never bury grass blades | 0.5 in | Mason / play sand | 648 sq ft | 5% |
| Fill under a slab | 4 in | Fill / concrete sand | 81 sq ft | 15% |
| Volleyball court | 12 in | Mason / play sand | 27 sq ft | 10% |
Sand weight per cubic yard
| Material | lb per yd³ | Tons per yd³ | Yards per ton | Sq ft per ton at 2 in | Typical range |
|---|---|---|---|---|---|
| Mason / play sand | 2,600 | 1.30 | 0.77 | 125 | 1.25 to 1.40 t |
| Fill / concrete sand | 2,700 | 1.35 | 0.74 | 120 | 1.30 to 1.60 t |
| Sand, wet | 3,200 | 1.60 | 0.63 | 101 | 1.50 to 1.65 t |
Sand coverage per yard and per bag
A 50 lb bag of dry sand is about 0.5 cubic feet: it covers 6 sq ft at 1 inch or 3 sq ft at 2 inches.
| Depth | 1 yd³ covers | Yards per 100 sq ft | Tons per 100 sq ft | 50 lb bags per 100 sq ft |
|---|---|---|---|---|
| 0.5 in | 648 sq ft | 0.15 | 0.20 | 9 |
| 1 in | 324 sq ft | 0.31 | 0.40 | 17 |
| 2 in | 162 sq ft | 0.62 | 0.80 | 34 |
| 4 in | 81 sq ft | 1.23 | 1.60 | 67 |
| 6 in | 54 sq ft | 1.85 | 2.41 | 100 |
| 12 in | 27 sq ft | 3.70 | 4.81 | 200 |
Sand calculator questions
How many 50 lb bags of sand are in a yard?
About 52 bags of dry mason or play sand, at 2,600 lb per yard. A 50 lb bag holds roughly 0.5 cu ft, and a yard is 27 cu ft, so plan on 52 to 54 bags per yard.
How much does a yard of sand weigh?
About 1.3 tons dry and 1.6 tons wet. Engineering ToolBox gives dry sand at 1,555 kg/m³ (2,621 lb per cubic yard) and wet sand at 1,905 kg/m³ (3,211 lb). Sand stored outside is usually damp, so a ton buys fewer yards than the dry figure suggests.
How much sand do I need for pavers?
A 1 inch bedding layer over the compacted gravel base, plus polymeric or joint sand afterwards. A 12 by 14 ft patio takes 0.57 cubic yards of bedding sand with 10% extra, about 31 bags of 50 lb. Joint sand is roughly 1 bag per 30 to 75 sq ft depending on joint width; check the bag. The base itself goes in the gravel calculator.
How much sand do I need for a sandbox?
Fill a sandbox 8 to 12 inches deep. An 8 by 8 ft box at 12 inches with 5% extra takes 2.49 cubic yards, about 3.2 tons or 130 bags of 50 lb play sand. A 4 by 4 ft box at 8 inches takes about 11 cubic feet, or 22 bags.
How much sand goes under an above-ground pool?
A 2 inch layer on level, compacted ground. For a 24 ft round pool, sand a 26 ft circle so it extends past the wall: 3.61 cubic yards with 10% extra, about 4.7 tons of mason sand.
Which sand should I buy?
Mason sand is fine and smooth: good for sandboxes, pool bases and lawn leveling. Concrete sand (also called fill sand or coarse sand) drains better and holds pavers in place. Play sand is washed and screened mason sand, sold in bags.